5a. Pumps column assembly (Transparent motors)

Written By: MyBar.io
  • Comments: 0
  • Favorites: 0

Difficulty

Moderate

Steps

4

Time Required

00:10:00 - 00:20:00

Sections

1

Flags

0

  1. Pumps Column

    • Pumps Column

    • Pumps (9x)

    • Wood Screws (Phillips - Silver) (18x)

    • Silicone Tube Connectors (18x)

    • Silicone Tubing 17in (9x)

    • Silicone Tubing 11in (9x)

    • Phillips Screwdriver

    Edit

  2. Attach the pumps to the column using the silver screws and the Phillips Screwdriver. Using the connectors, attach the 17in silicone tubing according to the color in the image.

    • Attach the pumps to the column using the silver screws and the Phillips Screwdriver.

    • Using the connectors, attach the 17in silicone tubing according to the color in the image.

    • Using the connectors, attach the 11in silicone tubing according to color in the image.

    Edit

  3. Pro Tip: Using blue tape, mark each 17in tube with the number of the pump Insert the 17in tubes through the column hole. Insert the distance sensor wire and the LED wire through the small hole on the column.

    • Pro Tip: Using blue tape, mark each 17in tube with the number of the pump

    • Insert the 17in tubes through the column hole.

    • Insert the distance sensor wire and the LED wire through the small hole on the column.

    • Place the column inside the case.

    Edit
  4. Edit
Finish Line

Author

MyBar.io

Member since: 03/18/2019

650 Reputation

7 Guides authored

0 Comments

Add Comment