Skip to main content

Site Navigation

Your Account

Choose Language

  1. Back panel
    • Back panel

    • Spacers M3 6mm (4x)

    • Screws M3 4mm (Black) (4x)

  2. Insert the spacers on the back panel. Using the M3 4mm screws mount the circuit board to the spacers.
    • Insert the spacers on the back panel.

    • Using the M3 4mm screws mount the circuit board to the spacers.

  3. Power Jack
    • Power Jack

    • Power Jack holder

  4. Insert the washer into the power jack. Insert the power jack (with the washer) from the back of the holder and secure it with the nut.
    • Insert the washer into the power jack.

    • Insert the power jack (with the washer) from the back of the holder and secure it with the nut.

    • Insert the power jack holder into the back panel

    • Connect the power wire to the circuit board

  5. Only one step left! Ready to jump to 6. Final assembly and closing?
Finish Line

mybar.io

Member since: 03/18/2019

362 Reputation

6 Guides authored

0 Comments

Add Comment