You're viewing a previously published revision of this guide. View latest revision

Feb 18, 2022 - 03:02:13

Jan 05, 2023 - 09:01:09 Jan 05, 2023 - 09:01:59 Jan 05, 2023 - 09:01:45 Feb 18, 2022 - 03:02:13 Feb 18, 2022 - 03:02:47 Aug 09, 2021 - 10:08:14 Aug 09, 2021 - 10:08:56 Aug 09, 2021 - 10:08:27 Aug 09, 2021 - 10:08:53 Aug 09, 2021 - 10:08:49 Apr 09, 2021 - 09:04:19 Apr 09, 2021 - 08:04:58 Feb 07, 2021 - 10:02:10 Feb 07, 2021 - 10:02:00 Feb 07, 2021 - 10:02:12 Feb 07, 2021 - 10:02:16 Feb 07, 2021 - 10:02:35 Feb 01, 2021 - 07:02:01 Feb 01, 2021 - 07:02:21 Feb 01, 2021 - 07:02:23 Feb 01, 2021 - 07:02:29 Feb 01, 2021 - 07:02:01 Feb 01, 2021 - 07:02:13 Feb 01, 2021 - 07:02:02 Feb 01, 2021 - 07:02:37 Feb 01, 2021 - 07:02:12 Feb 01, 2021 - 07:02:58 Feb 01, 2021 - 07:02:37 Feb 01, 2021 - 07:02:52 Feb 01, 2021 - 07:02:19 Feb 01, 2021 - 07:02:40 Feb 01, 2021 - 07:02:48 Jan 31, 2021 - 03:01:47 Jan 31, 2021 - 03:01:51 Jan 31, 2021 - 03:01:45 Jan 31, 2021 - 03:01:05 Jan 31, 2021 - 03:01:34 Jan 31, 2021 - 02:01:49 Jan 31, 2021 - 02:01:28 Jan 31, 2021 - 01:01:31 Jan 31, 2021 - 01:01:45 Jan 31, 2021 - 01:01:03 Jan 25, 2021 - 11:01:06 Jan 25, 2021 - 11:01:17 Jan 25, 2021 - 11:01:07 Jan 25, 2021 - 11:01:12 Jan 25, 2021 - 11:01:43 Jan 25, 2021 - 11:01:55 Jan 25, 2021 - 11:01:50 Jan 25, 2021 - 11:01:38 Jan 25, 2021 - 11:01:19 Jan 25, 2021 - 11:01:15 Jan 25, 2021 - 11:01:07 Jan 25, 2021 - 11:01:10 Jan 25, 2021 - 11:01:22

Newer

5b. Pumps column assembly (White motors)

Written By: MyBar.io

Comments: 8
Favorites: 0
Completions: 1

5b. Pumps column assembly (White motors)

Difficulty

Moderate

Steps

Time Required

00:10:00 - 00:20:00

Step 1 Pumps column assembly (components)

Pumps Column
Pumps (9x)
Wood Screws (Phillips) (18x)
Phillips Screwdriver

Step 2 Pumps column assembly

Attach the pumps to the column using the silver screws and the Phillips Screwdriver.

Attach the pumps to the column using the silver screws and the Phillips Screwdriver.
Install all 9 pumps.
Pumps rotate clockwise. Left tubes go to the back and right tubes go to the front.

Step 3 Install the column in the case

Pro Tip: Using blue tape, mark each tube on the right of the motor with the number of the pump.

Insert the tubes on the right of each motor through the big column hole.

Insert the LED wire through the small hole on the column.

Pro Tip: Using blue tape, mark each tube on the right of the motor with the number of the pump.
Insert the tubes on the right of each motor through the big column hole.
Insert the LED wire through the small hole on the column.
Insert the distance sensor wire through the small hole on the column.
Place the column inside the case.